Backyard Products GABLE 10 x 12, Руководство пользователя

Страница: 12 / 66

68
PARTS REQUIRED:
DORMER
Secure rafter with 3" screws in top plate and 1-1/2" screws spaced evenly through dormer side panels as shown.
Place left and right pre-assembled rafter (gusset facing in) resting on top of dormer frame and back wall top plate.
Ensure dormer rafter is flush along edge of panel and flush at peak of installed rafter (Fig. F, Fig. G) .
4
x12
1-1/2" (3,8 cm)
1-1/2" (3,8 cm)
Nails spaced evenly
3" (7,6 cm)
Screws
3" (7,6 cm)
Screws
3" (7,6 cm)
Screws
Fig. F
LEFT Rafter
x1 gusset
RIGHT Rafter
x1 gusset
Flush
1-1/2" (3,8 cm)
Nails
Flush
Peaks
Flush
Fig. G
3/8" GAP
(10 mm)
Flush
3/8 x 2-1/2 x 23-1/4" (1 x 6,3 x 59,1 cm)
x1
TEMPORARY SPACER
Use a 3/8" (1,0 cm) thick
temporary spacer here.
(Do not nail or screw
into spacer.)
Top Plate
x1
Pre-assembled dormer
rafter with 1 gusset
(for LEFT side)
x1
Pre-assembled dormer
rafter with 1 gusset
(for RIGHT side)
3" (7,6 cm)
x8