Bacharach Portable Combustion Analyzer, Инструкция

Страница: 29 / 91

PCA
4.10 Memory Directory Screen
Operation
‘Standard’ PCA Screen ‘Advanced’ PCA Screen
MEMORY DIRECTORY MEMORY DIRECTORY
«M8 2/24/01 3:45pm «98 2/24/01 3:45pm
M9 MEMORY EMPTY 99 MEMORY EMPTY
CLEAR MEMORY CLEAR MEMORY
The Memory Directory Screen is displayed by repeatedly pressing the
MENU
key from the Combustion Test Screen. This screen is used to select a
memory location which contains saved data that an operator can review.
NOTE: A ‘standard’ PCA has 10 memory locations num-
bered M0 thru M9, while an ‘advanced’ PCA has 100 memory
locations numbered 0 thru 99.
To select a data-memory location, first use the
st
keys to move the cursor
(
z
) in front of the desired memory location; then press the
ENTER
key. The
saved data is now displayed in either the Combustion Test Screen or Draft
Screen, depending on whether the chosen memory location contains
combustion or draft information. To print the saved data, refer to Sec- tion
4.23.
After viewing or printing the saved data, use the
st
keys to move the
cursor (
z
) to the exit (E) function; then press
ENTER
. This will redisplay the
memory directory.
Selecting the CLEAR MEMORY function displays the Clear Memory
Screen from where all saved data can be erased (refer to Section 4.24).
Front Panel Key Functions:
– Move cursor (
z
) up
– Move cursor (
z
) down
– Display the data saved at the chosen memory location
– Go to Combustion Test Screen
– Go to Memory To PC Screen for ‘Advanced’ analyzers, or the
Temperature Setup Screen for ‘Basic’ analyzers
Instruction 0024-9219 4-13