Introduction
H-SEM
2
Instruction 3015-4584
1.5 Safety Precautions
1.5.1 Explosive Atmosphere
Do not operate this equipment in the presence of flammable liquids, vapors or aerosols. Operation of any
electrical equipment in such an environment constitutes a safety hazard.
1.5.2 Misuse and Modifications to Monitor
The protection provided by the monitor may be impaired if the monitor is used in a manner not specified
by these instructions. Changes or modifications to this monitor will void the warranty.
1.5.3 Altitude Limit
6,562 ft (2,000 m)
1.5.4 Cleaning
To clean the outside of the case,
DO NOT
use soap and water.
USE
a dry cloth.
1.6 Shipping Precaution
When shipping the instrument, deflate the purge-air bag to prevent it from bursting due to changes in air
pressure. Deflate the bag by selecting the
EMTYBAG
function as described on Page 8.
1.7 Unpacking and Initial Checks
Your Halogen Safe Entry Monitor was carefully inspected at the factory before shipment, and packed so as
to be highly resistant to damage while in transport. When you receive the instrument, however, please
unpack it promptly and make a visual inspection to make sure that no damage has occurred during
shipment. Also check that all the following items have been received.
Item Qty.
Part
Number
Halogen Safety Entry Monitor
1
3015-4484
External Inlet Filter
1
3015-3420
Soft Carrying Case with
Shoulder Strap
1 3015-4474
Battery Pack & Charger
1
3015-4654
Battery Charge Cable
1
3015-4405
Instruction Manual
1
3015-4584
If damage was found, immediately file a claim with the carrier. If an item is missing, please contact
Bacharach’s Service Department for assistance (refer to Section
Service Centers
).
