TWIN
–
Use and maintenance instruction manual
Chap. 2
-
20
/
52 -
2.8
Safety devices
This section contains information regarding the safety devices adopted to eliminate or reduce machine
hazards.
When a safety device does not fully eliminate a hazard and a reduced risk remains, this risk is described
in the manual as a residual risk.
The safety devices that have been installed must be checked and kept efficient during the machine’s
entire service life.
•
Carry out the periodic checks described in this manual.
•
Removing or by-passing the safety devices (e.g. guards, photocell barriers, etc.), even
temporarily, is forbidden.
DEVICE
TYPE / FUCNTION
PHOTO / NOTES
M01
EMERGENCY STOP
Emergency stop device located on every
control panel, to be activated in the event of
danger for the exposed person.
The emergency stop pushbuttons are located
on the machine as follows:
•
On the main pushbutton panel.
•
On the loader pushbutton panel.
•
On the portable pushbutton panel.
Pressing the emergency stop immediately
stops the machine and cuts off power to
dangerous machine components.
M02
LOCK-OUT/TAG-OUT
All power sources may be blocked in the OFF
position using clamps and padlocks.
•
Compressed air valve
Before carrying out any maintenance on the
machine, power sources must be locked and
tagged out using the appropriate padlocks
and clamps.
M03
SIGNAL COLUMN
Signals machine conditions using warning
lights and horns.
Every time the machine is started up, the
warning lights turn on and the horn sounds,
so as to warn everybody present in the work
area of imminent machine start-up.
If necessary, press the nearest emergency
stop button to interrupt machine start-up.
M04
FIXED GUARD (ALL-AROUND
ENCLOSURE)
All-around enclosure made of sheet metal and
transparent material (e.g. polycarbonate),
strong enough to resist flying utensils.
The all-around enclosure consists in safety
panels that protect the entire machine. The
enclosure may be accessed through the
doors, which are fitted with interlocking
device that block the panels.
Содержание Twin
