Bacci Twin, Инструкция по эксплуатации и обслуживанию

Страница: 73 / 202

Chap. 3
- 3
/28 -
CHAPTER 3 – Machine description and technical data
3.1 Description of machine functioning
The TWIN work center with 6 interpolated axes has a high-stiffness, portal structure, particularly
suitable for the production of elements of chairs, tables, beds, frames, stairs and musical
instruments.
The machine is not designed to be used in line with other machines. The material to be machined
is loaded and unloaded automatically onto the machine work surfaces.
The machine has been designed for machining wooden pieces or similar materials, whose
characteristics are defined in the technical data sheet. The processing occurs at predefined
operator workstations, where the operator can carry out the loading/unloading of the materials.
During the processing, the piece is supported by support devices (i.e. clamps and/or user-built
equipment), placed on the support surface (TABLE). The processing is performed by tools fixed on
a 5-axes machining head. The machine is designed for single-head operation.
The oversized the beams allows for wide sideways movements of the heads (X axis).
The elevated dynamics of the TWIN work station derives from the use of precision reducers with
no backlash and that require no periodic adjustments, as well as from the perfect automatic
lubrication "from the inside out". In addition to traditional programming systems, the DOUBLE JET
work station may be programmed using the exclusive Bacci PITAGORA Software, which best takes
advantage of the elevated machining dynamics, thereby reaching exceptional performance yields.
3.2 Characteristics of machinable materials
Machinable materials are:
•
Wood (hardwood, plywood, block board, wood strips, engineered woods, laminar woods,
hollow cored woods).
•
Wood derivatives (hardboard, MDF, OSB) or similar materials*.
•
Materials defined as plastics or composites, that is polymers (for example, PVC, ABS,
PMMA, Lexan), resins (for example glass fiber reinforced plastics), thermoplastic materials
(meaning materials resulting from treated polymers) and rubber materials.
* similar materials: materials that have machining parameters for milling, boring and cutting that are
comparable to the machining parameters for wood materials (for example: urea resins, PVC, ...)
Machining materials other than those mentioned above is not permitted.