background image

39

40

6.0 

INFANT RESTRAINT

6.0

INFANT RESTRAINT

1. Check that the Harness Straps are installed in the proper slot 

or adjusted to the proper height as described in section 

5.11

Adjustment of the Shoulder Straps

, preceding.

2.

 

The clothing you dress your child in will  

affect the proper use of the Safety Seat.  

Please dress your child in clothing that will:
• Allow the Harness Straps to securely 

latch between your child’s legs.

• Keep the shoulder straps properly 

located on your child’s shoulders.

3. Place the Safety Seat on a firm and 

level surface. Move the carry handle 

to the non rocking position. Loosen 

the Harness Straps by pulling on the 

straps while pushing on the Harness 

Adjuster Button located below the pad 

just in front of the buckle. Unfasten 

the Harness Chest Clip. Unbuckle the 

Harness Straps and drape the Harness 

Straps over the Seat back or to the 

sides of the Safety Seat (Fig. 39-1).

4. Place your child in the Safety Seat so 

that the child’s bottom is against the 

back and bottom of the seat (Fig. 39-2).

5. Pull the harness straps down over your 

child. Check that the harness straps are 

not twisted.

Fig. 39-1

Fig. 39-2

Correct

Incorrect

6.3 For the 5-Point Harness

• Insert both buckle tongues into the harness 

buckle on the crotch strap. Pull up and test 

buckle tongues to be sure they are secure 

(Fig. 40-1). Fasten the Harness Chest Clips 

together (Fig. 40-2). Position the Harness Chest 

Clip, by sliding the Clip either up or down on the 

Harness Straps, so that it is level with the child’s 

armpits (Fig. 40-3). Make sure that you hear 

the tongues click into the buckle and check that 

both are firmly latched by pulling upward on the 

straps. If the harness straps are not securely 

buckled, the safety seat will 

NOT

 provide 

protection for your child. 

DO NOT 

use the safety 

seat, even as a carrier, if the harness does 

not securely buckle. Please call Baby Trend at 

1-800-328-7363 for assistance. 

Accessory products for use with the Safety Seat
are acceptable for use provided that they do not 
interfere with the harness assembly, or the proper 
adjustment of the harness such that it remains 
tight on the child’s shoulders at all times.

Fig. 40-1

Fig. 40-2

Fig. 40-3

Содержание Secure-Lift 35





































Отзывы: