BABYTREND Secure-Lift 35, Руководство пользователя

Страница: 15 / 36

27 28
5.0
FEATURES
5.0
FEATURES
5.8 Attaching the Canopy
Slip the canopy stays through the
sleeves on the canopy.
The canopy is attached by inserting the
ends of the canopy plastic stays into the
female fittings found on the inside of the
handle hub (Fig. 28-1).
Use the hook and loop fasteners
on the rear side of the fabric to join
the canopy to the Car Seat frame
(Fig. 28-2).
In-Vehicle Handle Use
ONLY use Rebound or Storage
Handle positions in vehicle. Use
Storage position for children
greater than 22 lb or if feet can
touch the handle (Fig. 27-1).
Fig. 27-2
Fig. 27-1
Fig. 28-1
Fig. 28-2
Fig. 28-3
To adjust handle position
• Depress the two buttons located on
the handle just above the connection
to the Car Seat shell to release the
handle.
• Slowly rotate the handle to the
desired position. The buttons should
pop out and the handle should
automatically lock into the new
position (Fig. 27-2).
• Before lifting the Car Seat,
push on the handle to check
that both sides of the handle
have locked into the Carry position.
5.9 Ergonomic Side Carry Grip
• Rotate handle to the carry
position. Cross forearm through
the carry handle to place your
hand on the grip (Fig. 28-3).
Rebound
Storage