BabyLove BL620A 2010, Инструкция

Страница: 13 / 29

24 25
Press down
firmly on base
Pull seatbelt
tight
Lap Belt
Tab
Seat belt Clip
C. For car’s with flat seats, some
packing (such as firmly rolled up
nappy or towel) may be required
to get a better angle and to have
the stabilising bar contact the car’s
seat back or close to the seat back.
D. Place the base into the car in the
selected seating position.
G. then feed the sash belt under the tabs and
through the Seatbelt Clip
Check that the Base is securely held. If it is
not secure, readjust, or move to another
seating position in the vehicle.
H. Recheck the installation angle, and adjust
if necessary.
I. Check that the Base is securely held.
If the Base moves easily to either side,
retighten the seat belt or try another
position in the vehicle. Some sideways
movement is common and acceptable.
Note: If using a lap only seatbelt thread
through the tabs and seatbelt clip. The free
end of the lap belt does not need to be
threaded through the seat belt clip.
Packing
Blue
REARWARD-
FACING BELT
PATH
label
E. Thread the vehicle lap belt under the
tabs and through the seat belt clip,
Pull the sash belt to remove slack.
F. Engage the seat belt buckle and pull
the sash belt to achieve a tight fit
whilst pressing on the base.
When the Base is secured with a
Lap/Sash Belt both the Lap and Sash
belts need to pass through the Seat
belt Clip.
HOW TO INSTALL HOW TO USE
Blue
REARWARD-
FACING BELT
PATH label