BabyLove BL620A 2010, Инструкция

Страница: 25 / 29

48 49
DISTANCE TO MEASURE
TO THE ANCHOR POINT
Adjustable upper
Anchorage strap.
The shaded areas of this diagram illustrate the possible locations of the anchor
fitting. Within each shaded area is an anchor fitting showing the correct way to
install the fitting. Ensure the anchor fitting is aligned as illustrated unless stated
otherwise in the vehicle owner’s handbook.
FRONT OF VEHICLE
Extension Strap distance to be measured.
Length 300mm (Use Babylove part K304 or equivalent)
Length 600mm (Use Babylove part K305 or equivalent)
Available from all major child restraint retailers.
INSTALLATION OF CAR ANCHOR FITTING
INSTALLATION OF CAR ANCHOR FITTING
Front of Vehicle
IF THE CAR IS FITTED WITH CHILD
RESTRAINT ANCHORAGE POINT
Locate the anchorage point behind the
rear seating position. (consult the car
owners handbook for the location of the
anchorage point). The anchorage point
should be directly behind and central to
the restraint. Remove thread plug from
the parcel shelf/floor/roof, etc. and install
anchor bolt and fitting as shown in Fig.1.
CAUTION: DO NOT OVERTIGHTEN
ANCHOR BOLT. OVERTIGHTENING MAY
FRACTURE OR BREAK BOLT. MAXIMUM
TORQUE IS 20 Nm
(14.75 ft.lb.)
Note: Minimum of five full turns of anchor
bolt is required before tightening force is
applied.
UPPER ANCHORAGE FITTING
Attachment Bolt
Lock washer
Anchor fitting
Spacer(s) if
required
Vehicle metal
structure
Vehicle trim
Fig.1.