![background image](http://html1.mh-extra.com/html/baby-trend/go-lite-propel-35-tj16/go-lite-propel-35-tj16_instruction-manual_3288677007.webp)
SAFETY
12
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
11
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
TO RELEASE THE CHILD
Type 1
15)
• To release, push Button on Center
Clasp, the two Harness Buckles will pop
free (Fig. 15).
Type 2
16)
• To release, apply pressure to both
sides of each male clip until the clip is
released (Fig. 16).
TO SECURE THE CHILD
WARNING:
Avoid
serious injury from falling or
sliding out. Always use the
safety harness.
STRANGULATION
HAZARD:
Child can
strangle in loose straps. Never
leave child in seat when straps
are loose or undone.
Type 1 and 2
14)
• The shoulder straps of the 5-point harness
have 3 attachment positions. Select the
position that places the shoulder strap level
with, or below the top of the child’s shoulder
(Fig. 13a). To adjust harness height unhook
the shoulder strap from the crotch buckle.
Feed the shoulder strap through the
harness spread slots. You can access these
slots from the rear of the seat underneath
the fabric. Feed shoulder strap through
appropriate slot and reattach shoulder strap
to crotch buckle.
• Carefully place the child in the stroller seat
and bring the safety harness around the
child’s waist and over the shoulders. Place
the crotch strap between the child’s legs.
Insert the male end of each shoulder/waist
belt into the buckle on the crotch strap.
Tighten the harness to be snug around the
child’s waist and over the child’s shoulders
(Fig. 14b).
Fig. 14b
Fig. 14b
Fig. 14a
Shoulder Strap
Squeeze
Waist Strap
Crotch Strap
Adjust for a snug fit
Type 2 Buckle
Adjust for a snug fit
Type 1 Buckle
Fig. 15
Center Clasp
Type 1
Fig. 16
Type 2