Baby Lock Regalia BLRG20, Руководство по обслуживанию

Страница: 27 / 80

BabyLock.com
Page 27
Section 9: Needle Position Y / Front to Back, Check,
& Adjustment
Machine Front / Machine Back
G
D
The needle position adjustment is the most important
of all adjustments in the machine. Needle position
provides the foundation for which all other settings
are made .
Once the needle position has been completed, great
care must be maintained to keep this setting. It is
important that the sewing machine be transported
carefully, so as to not allow bumping or dropping.
Check: Use a new System 134/Size 100 needle. Check
the needle for straightness on a flat surface such as
the needle plate. Press down on the shank and roll
the needle watching for the tip to wobble. The tip will
not wobble if the needle is straight. The needle must
be centered in the stitch hole of the needle plate.
Check with needle eye flush with the needle plate, do
not check with needle in the lowest position.
Adjustment for Y axis (front to back): Cover Off
NOTE: The Y (front to back) adjustment is
done with the front frame cover off.
If a correction is necessary:
• Loosen first screws D and G
• Then loosen screw A and B
• While pushing the head frame back into the main
casting, gently slide the head frame left or right to
correct as necessary .
• Tighten screws A and B
NOTE: If needle position changes, repeat the
process. Do not tighten screw D or G at this
time. They will need to be loose to adjust the
X axis in the next step.
A
B
Machine Front / Machine Back
Tools required: (3 mm and 4 mm handle Allen).