Baby Lock Regalia BLRG20, Руководство по обслуживанию

Страница: 3 / 80

BabyLock.com
Page 3
The Regalia utilizes high-tech electronics and an innovative touch-pad user interface to offer greater
functionality and ease of operation to home quilters than ever before conceived in the quilting industry. The
Regalia quilting machine is a high quality machine that incorporates very robust design features and is very
easy to service .
The Regalia machine is constructed following a specific sequence of operations, similar to the construction of a
house. Walls cannot be erected until the foundation is in place. Similarly, this service manual has been written
with an adjustment logic that is driven by the construction processes used to create the machine. If the service
technician carefully follows the adjustment steps in the order presented, a well running machine is possible
each and every time.
About the Regalia
About the Manual and Support
The purpose of this service manual is to help the technician complete a repair on a machine accurately and
quickly. The manual is complete with photographs and explanations that we hope will aid you in your repair
efforts. In addition to the teaching aids found herein, you will also find all of the tools listed that are necessary
for adjustments. If you need help in locating these tools for purchase, please contact Baby lock.
Service Manual Guidelines
• Adjustments shown in the manual should only be made if a setting deviates from the tolerance specified in
the manual .
• Adjustments should be made only in the logical sequence shown and described in the manual. Do not
jump ahead, or start in the middle of the adjustment sequence. This may cause additional or more serious
problems than the original issue .
• Safety must be considered when working on any machine. Safety warnings are included throughout this
manual where appropriate, but these warnings do not address all possible safety concerns that might
confront the service technician .
• When working on or near any live electrical components or assemblies, the power cable must be removed
from the machine .
• We urge you to observe the cautions in the manual.
NOTE: The hand wheel must always be turned in the direction of normal rotation unless otherwise
instructed. This is especially true when making the loop-lift timing and needle-height
adjustment. Exceptions are removing thread locks or testing belt tension. The hand wheel
may be rocked forward and reverse in these cases.