Baby Lock Regalia BLPS4-RG, Руководство по началу работы

Страница: 11 / 26

www.BabyLock.com Getting Started | 11
Installation
These instructions are for installing Pro-Stitcher on your Baby Lock machine (with an 8-wheel Precision-
Glide™ carriage). Baby Lock recommends installation by an authorized Pro-Stitcher retailer, if available.
NOTE : This installation is easier to complete without the frame side arms or poles in place. If the side
arms have already been installed, it is not necessary to remove them, but the poles should be removed.
Tools required
• Power drill
• 3mm Allen wrench
• 4mm Allen wrench
• 5mm Allen wrench
• Slotted screwdriver (one large and one small)
• Phillips screwdriver (one large and one small)
• Manual engagement/disengagement tool
(see Parts List, item P)
Installation of the X-Rack and Y-Rack
To install the X-Rack
1. Remove the blue 12-foot Flexirack
(see Parts List,
item B)
and the Pro-Stitcher carriage
(see Parts
List, item E)
from the box.
2. Place the Pro-Stitcher carriage on the frame.
Starting at one end of the table, begin mounting
the blue Flexirack to the front of the table while
aligning it to the front white gear on the carriage.
Peel back a few inches of the pink protective layer
of the tape.