Baby Lock Ellisimo BLSO Скачать руководство пользователя страница 266

Страница: 266 / 364

USING THE MEMORY FUNCTION

252

Recalling from the Computer

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine (see page 248).

On the computer, open “Computer (My
computer)” then go to “Removable Disk”.

Move/copy the pattern data to “Removable
Disk”.

Pattern data in “Removable Disk” is written to the
machine.

Press .

The patterns in the computer are displayed on the
selection screen.

Press the key of the pattern you want to
recall.

Press

to return to the original screen.

Note

• While data is being written, do not discon-

nect the USB cable.

• Do not create folders within “Removable

Disk”. Since folders are not displayed, stitch
pattern data within folders cannot be
recalled.

Содержание Ellisimo BLSO













































































































































































































































































































































































Результаты поиска

Содержание Ellisimo BLSO

Отзывы:

Baby Lock Ellisimo BLSO, Инструкция и справочник, Страница: 266 / 364

Результаты поиска

Содержание Ellisimo BLSO

Отзывы: