Baby Lock Ellisimo BLSO, Инструкция и справочник, Страница: 111 / 364

SEWING THE STITCHES
U
tili
ty Stit
ch
es
97
3
e
Position the side cutter so that the side
cutter pin is aligned with the notch in the
presser foot holder, and then lower the
presser foot.
a
Notch in presser foot holder
b
Pin
o
The side cutter is attached.
f
Raise the presser foot and pull out a long
section of the upper thread. Pass it below
the presser foot and pull it out in the fabric
feed direction.
a
Presser foot
b
Upper thread
g
Make a cut of approximately 20 mm
(approx. 3/4 inch) in the fabric.
a
20 mm (approx. 3/4 inch)
h
Position the fabric so that the right side of
the cut is on top of the guide plate and the
left side of the cut is underneath the presser
foot.
a
Guide plate (lower knife)
b
Presser foot
c
Upper thread
Memo
• If the fabric is not positioned correctly, the
fabric will not be cut.