Baby Lock Ellisimo BLSO Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 364

Baby Lock Ellisimo BLSO Скачать руководство пользователя страница 18

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

4

Using the Flat Bed Attachment

Pull the top of the flat bed attachment to open the
accessory compartment.

Using the Accessory Case

■

Opening the Accessory Case

Fully slide the bar on each side of the accessory
case, and then lift off the lid to open the case.
The case can only be opened or locked correctly if
both bars are slid in the same direction.

a

Bars

■

Closing the Accessory Case

a

Fully slide the bar on each side of the
accessory case lid to align the notches in
the lid with the notches in the bars.

b

Place the lid on top of the case so that the
notches in the lid align with the tabs on the
case, and then slide the bar on each side
back to the center of the accessory case.

a

Bars

«
...
16
17
18
19
20
...
»

Содержание Ellisimo BLSO













































































































































































































































































































































































Отзывы:

Нет отзывов