Baby Lock Ellisimo BLSO, Инструкция и справочник, Страница: 226 / 364

SEWING AN EMBROIDERY PATTERN
212
c
Set the prewound bobbin in the same
direction as a regular bobbin.
d
When using a paper-sided prewound
bobbin, remove the side paper on the top
side of the prewound bobbin.
a
Top paper
e
Follow steps from “Setting the Bobbin” on
page 43.
Sewing Embroidery Patterns
Example:
a
Embroidery color order
b
Cursor
a
Thread the machine with thread for the first
color, pass the thread through the hole in
embroidery foot “W”, pull out some thread
to give it some slack, and then lightly hold
the end of the thread in your left hand.
b
Lower the presser foot, then press the
“Start/Stop” button to start embroidering.
After 5-6 stitches, press the “Start/Stop”
button again to stop the machine.
c
Trim the excess thread at the end of the
seam. If the end of the seam is under the
presser foot, raise the presser foot, then
trim the excess thread.
d
Press the “Start/Stop” button to start
embroidering.
o
When the first color is completely sewn, the machine
will automatically trim the threads and stop. The
presser foot will then automatically be raised.
On the embroidery color order display, the next
color will move to the top.
e
Remove the thread for the first color from
the machine. Thread the machine with the
next color.
Memo
• The [+] cursor moves over the pattern,
showing which part of the pattern is being
sewn.
b
a
Memo
• If there is thread left over from the beginning
of sewing, it may be sewn over as you con-
tinue embroidering the pattern, making it
very difficult to deal with the thread after the
pattern is finished. Trim the threads at the
beginning of each thread change.