Baby Lock Ellisimo BLSO Скачать руководство пользователя страница 190

Страница: 190 / 364

USING THE MEMORY FUNCTION

176

Select the stitch pattern’s .pmx file and
copy the file to the computer.

Retrieving Stitch Patterns from
the Machine’s Memory

Press .

The pocket selection screen appears.

Choose a stitch pattern to retrieve.

If the entire saved stitch pattern is not displayed,
press the thumbnail.

Press

to return to the original screen without

saving.

Saved stitch patterns

Press .

Press

to delete the stitch pattern.

The selected stitch pattern is retrieved and the
sewing screen will be displayed.

Note

• Do not turn off the machine while the “Sav-

ing” screen is showing. You may lose the
data.

Содержание Ellisimo BLSO













































































































































































































































































































































































Результаты поиска

Содержание Ellisimo BLSO

Отзывы:

Baby Lock Ellisimo BLSO, Инструкция и справочник, Страница: 190 / 364

Результаты поиска

Содержание Ellisimo BLSO

Отзывы: