Baby Lock Ellisimo BLSO, Инструкция и справочник, Страница: 196 / 364

BEFORE EMBROIDERING
182
BEFORE EMBROIDERING
Embroidery Step by Step
Follow the steps below to prepare the machine for embroidery.
Step 3
Step 1, 2
Step 7 Step 5
Step 4
Step 6, 8
Step 9
Step # Aim Action Page
1 Presser foot attachment Attach embroidery foot “W”. 183
2 Checking the needle Use needle 75/11 for embroidery. * 58
3 Embroidery unit attachment Attach the embroidery unit. 184
4 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place. 37
5 Fabric preparation Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. 197
6 Pattern selection Turn the main power to ON, and select an embroidery pattern. 186
7 Embroidery frame attachment Attach the embroidery frame to the embroidery unit. 203
8 Checking the layout Check and adjust the size and position of the embroidery. 205
9 Embroidery thread setup Set up embroidery thread according to the pattern. 46
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.). Ball point needle (golden colored) 90/14 is not recommended for embroidery.