3.8
4G Lift Dialer & 4G Lift Dialer Box
Configuration
3.9
4G Lift Dialer & 4G Lift Dialer Box
Configuration
3.5. CONFIGURATION EXAMPLES
Phone number for SOS calls: 3351111111
(see line 3)
Second phone number for SOS calls: 3352222222
(see line 4)
Phone number for Autotest calls: 3408888888
(see line 5)
Periodic test call every 3 days at a time calculated by 4G Lift Dialer
(see line 6)
Current date and time: 3 June 2014, time 16:04
(see line 7)
Phone number for Technical & Battery alarm calls: 3209999999
(see line 8)
Enable battery fault alarm:
(see line 9)
COMMAND DESCRIPTION
COMMAND BY PHONE
COMMAND VIA SMS
1
Password Configuration
21010
-
2
Factory Reset
*99#
21010*99#
3
First num. For SOS Call
20
01
*04*
3351111111#
2101020
01
*04*
3351111111#
4
Second num. For SOS Call
20
02
*04*
3352222222#
2101020
02
*04*
3352222222#
5
Phone Number for autotest call
2110*03*
3408888888#
210102110*03*
3408888888#
6
Periodicity for test call
35
03*9999#
2101035
03*9999#
7
Current data and Hour
34
030614*1604#
- (A)
8
Phone number for Technical & Battery alarm
2211*03*
3209999999#
210102211*03*
3209999999#
9
Enable Battery Fault alarm
500010#
21010500010#
Note:
(A)
4G Lift Dialer synchronizes the date and hour with the hour of the GSM network at every power on, if
supported by the GSM operator, and after any received SMS.
3.6. MULTI-COMMANDS VIA SINGLE SMS
21010*99#2001*04*
3351234567
#2111*03*
3409876543
#35
03*9999
#2212*03*3523456789#500010#
3.7. RECORDING THE ALARM MESSAGE (COMMAND 40#)
During the alarm call, the alarm message is played back several times by 4G Lift Dialer to the Alarm Center and/or Support service
before enabling the speakerphone conversation with the Car.
The recording is performed through the configuration local phone or by calling 4G Lift Dialer.
Insert the configuration password, then digit the command 40# and wait for the sound signal of
CORRECT CONFIGURATION
.
After that you can start recording the message. The vocal message can be maximum 20 seconds long.
To stop the recording before the 20 seconds, press * keys
We suggest to record in the message the address of the system and the keys to press to active the speakerphone mode in the
Car and to reset the alarm.
Example “Lift Alarm at Digicom company in Legnano, viale Luigi Cadorna 95. Press 3 for speakerphone, at the end 1 9 to reset
the alarm”.
3.8. PLAYING THE ALARM MESSAGE (COMMAND 41#)
The alarm message is played back several times by 4G Lift Dialer to the Alarm Center and/or Support service before enabling the
speakerphone conversation with the Car.
To play the recorded alarm message you must use the configuration local phone or call 4G Lift Dialer.
Insert the configuration password, then digit the command 41# .
At the end of message playback you will hear the sound signal
CORRECT CONFIGURATION.
