2.12
4G Lift Dialer & 4G Lift Dialer Box
Installation
2.13
4G Lift Dialer & 4G Lift Dialer Box
Installation
SERIAL PORT RS232
USB PORT
RS232 ENABLED
SIM HOLDER
1
5
10
15
20
BATTERY
SCREW TERMINAL
ANTENNA
RESET
CONFIG
GSM
POWER
22
1
8
Reset
ALARM
2.14.
LIFT DIALER: LED INDICATORS
Through 3 led indicators you can check the status of 4G Lift Dialer:
LED STATUS DESCRIPTION
1 POWER
OFF
Device powered OFF
Blinking
A
Main power absent, battery in use
ON
Device powered ON
2 GSM
OFF
SIM card not present or PIN request
or
network search or Low GSM Signal
Blinking
Good GSM Signal
ON
Excellent GSM Signal
3 CONFIG
1 Long blink
Correct configuration
3 Long blinks
Wrong configuration
Continuously blinks
B
Roaming mode or virtual operator
C
NOTES:
(A) : 2 sec OFF / 300 msec ON To reduce the battery consumption, when main power is absent, the other
leds are turned off
(B) : 2 sec OFF / 300 msec ON
(C) : In the new firmware version the calls are always enabled
2.15.
VOICE BOX: LED INDICATORS
Through 2 led indicators you can check the status of Voice Box:
LED
STATUS
DESCRIPTION
1 SENT ALARM
OFF
No alarm
pin 7-9
ON Yellow
Alarm is active
2 RECEIVED ALARM
OFF
Alarm not received/not registered
pin 8-9
(speakerphone not active)
ON Green
Alarm received by the Alarm
Center (speakerphone active)
