3.6
4G Lift Dialer & 4G Lift Dialer Box
Configuration
3.7
4G Lift Dialer & 4G Lift Dialer Box
Configuration
DESCRIPTION
COMMAND
Relay1 management
:
open gate
N.O. pin12-13
N.C. pin13-14
If the bell management is active (command 84t#) the command open gate 81#
is ignored.
8 1 #
Relay1 management: bell management
Example 8 4 1 0 #
8 4 [t] # t:
0 = disabled (default 0).
From 1 to 98 seconds of bell ring
up to speakerphone is enabled.
99= continuous bell ring up to
speakerphone activation.
Relays 1 and 2 management: SENT ALARM and RECEIVED ALARM
The signaling of SENT ALARM and RECEIVED ALARM is reported on Relays
1 and 2 of 4G Lift Dialer.
8 5 [x] #
x : 0 = disabled
1 = enabled
Enable Relays 1 in case of alarm on the sensor connected on VoiceBox
Pit Water
Ex. 8 7 1 * 1 0 #
87 [a] * [t] #
a = 0: disable
1: enable
9: Reset of relays and alarm state
t = 0 relays always enable
1-10 sec.
Relay 2 management
:
open gate
N.O. pin15-16
N.C. pin16-17
If the law 13 management is active (command 831#) the command open gate
82# is ignored.
8 2 #
Relay2 management: GSM network ABSENT
The presence/absence of GSM network is reported on the Relay 2.
8 6 [x] #
x : 0 = disabled
1 = enabled
Relays 2: LAW 13
Ex. 8 3 1 #
83 [x] #
a = 0: disable
1: enable
Time of pressure for SOS button (VoiceBox)
Example 9 3 1 #
Example 9 3 2 3 #
9 3 [t] [c] #
t:
from 1 to 9 (default 5)
c: 1 or not present = car 1
2 = car 2
3 = car 3
Device restart
* 8 8 #
PIN insertion
* 9 3 [pin] #
pin: pin code of the SIM, 4 digits.
After 3 faulty attempts, the PUK
code will be required.
