B.Pro SAW 1, Руководство по эксплуатации

Страница: 12 / 48

B.PRO Food Distribution Carts SAW/SAG/BTW9x7
– 8 –
Hot unit parts and objects
The unit interior and the objects located within become hot while the unit is in
operation (danger of burns!). Allow the unit to cool off before it is cleaned.
Maintenance Locking brakes
Regularly check the effectiveness of the locking brakes.
If the effectiveness of the brakes is not sufficient, have the defective roller
replaced immediately by one of the following:

In-house, B.PRO-trained professionals

External, B.PRO-trained customer service

B.PRO Service
Food distribution cart SAW/SAG with sliding cover
There is a water condensation wiper under the sliding cover at every short
side of the unit. Check the effectiveness of the water condensation wiper
monthly. If water condensation drips onto the floor when the sliding cover is
opened, there is a danger of slipping.
If necessary, replace the water condensation wiper.
Electrical safety: reinspection
At least once every six months, have a periodical electrical safety inspection
carried out by a professional electrician in accordance with the DIN VDE 0702
series of standards.
Connection cable and power plug
At least once every six months, check the connection cable and power plug
for mechanical damage and signs of excessive aging in accordance with
BGV A 2 or the corresponding national regulations.
Repairs Authorized persons
The unit may only be repaired by the following service points:

In-house, B.PRO-trained professionals

External, B.PRO-trained customer service

B.PRO Service
The warranty will be invalidated if the unit is repaired by anyone else.
Standards and guidelines Observe the applicable standards, guidelines and safety regulations.
The operator is responsible for compliance with the applicable standards,
guidelines and safety regulations.