23
COOK I-flex
OPERATING INSTRUCTIONS
Charcoal filter pad
The charcoal filter pad must be protected against moisture. A wet charcoal filter pad must never
be dried in a microwave oven – this poses a major fire hazard.
Hygiene
You must comply with the specifications in Regulation (EC) no. 852/2004 and your national hygi-
ene regulations.
Cleaning interval
Clean the extraction bridge and its filter cassettes, the grease pan, induction hob and its air baff-
le and the induction hob pre-filter on a daily basis or after each use, depending on how dirty they
are. Replace charcoal filter pad when saturated.
Clean odour filter box according to level of soiling, but at least once weekly. Clean (optional)
ION TEC when it is dirty. Also observe replacement notifications on the B.PRO Control controller
in this respect.
Cleaning methods
Use approved cleaning methods only.
ª
Do not use steam jet units, high-pressure cleaners, water sprayers or similar cleaning devices.
Cleaning agents
Do not use metal parts for cleaning. Metal parts can damage the unit and/or lead to corrosion.
Do not use pointed or sharp objects for cleaning. They can damage the unit.
Do not use scouring agents. Scouring agents scratch surfaces.
Cleaning scrapers may only be used to pre-clean the glass ceramic surface on the induction hob
if they are in perfect condition. Damaged cleaning scrapers will scratch the surface.
Hot unit parts, objects and food
The unit, especially the induction hob, will become hot during use and can cause burns.
Allow the unit to cool for at least 20 minutes before cleaning.
Cleaning water
Dry the unit thoroughly after cleaning. Remove any cleaning water from any optional drawers, the
odour filter box, the extraction bridge and the induction hob when doing so.
A danger of slipping exists if cleaning water runs out of the unit during or after cleaning. There is
also a risk of a short circuit or electric shock.
