B+BTec KARAT 180 Series, Перевод оригинальной инструкции

Страница: 17 / 36

KARAT ® 180 GB
OPERATING MANUAL KARAT® 180
17
c)
Wear hearing protection when diamond
drilling. Exposure to noise can cause hearing
loss.
d) When the bit is jammed, stop applying
downward pressure and turn off the tool.
Investigate and take corrective actions to
eliminate the cause of the bit jamming.
e) When restarting a diamond drill in the
workpiece check that the bit rotates freely
before starting. If the bit is jammed, it may
not start, may overload the tool, or may cause
the diamond drill to release from the work-
piece.
f ) When securing the drill stand with
anchors and fasteners to the workpiece,
ensure that the anchoring used is capable
of holding and restraining the machine
during use. If the workpiece is weak or
porous, the anchor may pull out causing the
drill stand to release from the workpiece.
g)
When securing the drill stand with a
vacuum pad to the workpiece, install the
pad on a smooth, clean, non-porous sur-
face. Do not secure to laminated surfaces
such as tiles and composite coating.
If the
workpiece is not smooth, flat or well affixed,
the pad may pull away from the workpiece.
Working safely with this machine is possible
only when the operating and safety informa-
tion are read completely and the instruc-
tions contained therein are strictly followed.
Before using for the first time, ask for a prac-
tical demonstration.
Before working on the machine
itself, pull the mains plug.
Wear safety glasses and
ear protectors when
impact drilling.
Wear light respiratory
protection and a hard
hat.
Be careful of hidden electrical lines
or gas and water pipes. Check the
working area, e.g., with a metal
detector.
•
Before commencing work, the PRCD pro-
tective switch must be checked for proper
functioning.
•
Before commencing work consult the
responsible structural engineers, architects or
site supervision about any planned borings,
especially when cutting through reinforcing
steel.
•
The machine may only be operated using
a power supply with protection earthing
according to the regulations.
•
The machine may not be operated by per-
sons under the age of 16 years.
•
The drill stand must always be mounted
firmly and must not be able to move during
drilling.
•
Only mount the drill stand on an even, firm
and smooth surface using the vacuum pump
.
When carrying out
“over” head wet cut
core drilling, a
water collecting
ring and water suc-
tion are always to
be used. These must be in perfect
condition.
•
When drilling “over” head
always
secure the
drill stand with the assembly.
•
Prevent the drilling core from falling.
Use only original B+BTec parts and acces-
sories.
FOR YOUR SAFETY
Please read and comply with these
instructions prior to the initial ope-
ration of your device.
Retain these instruction manual for
future reference or for subsequent
possessors.
WARNING: Prior to the first start-
up, it is definitely necessary to read
the Safety instructions!
In case you do not adhere to this instruction
manual and the safety instructions, this may result
in damages on the device and cause dangerous
situations for the operator and other people. In
case of transport damage inform vendor imme-
diately.