85
SE400 SERIES
The ensuing table for
LLDP Global Config
settings are informational only: LLDP Enabled,
LLDP PDU Disable Action, Transmission Interval, Holdtime Multiplier, Reinitialization Delay
and Transmit Delay.
LLDP Port Settings
The LLDP Port Settings page allows you to configure the state (enabled or disabled) of the
selected port.
To access this page, click
Management
>
LLDP
>
LLDP Port Settings
.
Figure 101: Management > LLDP > LLDP Port Settings > LLDP Port Configuration
The following table describes the items in the previous figure.
Figure 102: Management > LLDP > LLDP Port Settings > Optional TLVs Selection
The following table describes the items in the previous figure.
Table 83: Management > LLDP > LLDP Port Settings > LLDP Port Configuration
Item
Description
Port Select
Enter the port number associated with the LLDP setting.
State
Click the drop-down menu to select the LLDP port state.
Apply
Click
Apply
to save the values and update the screen.
Table 84: Management > LLDP > LLDP Port Settings > Optional TLVs Selection
Item
Description
Port Select
Enter the port number associated with the TLV (optional) selection.
Optional TLV Select
Click the drop-down menu to select the LLDP optional TLVs to be carried
(multiple selections are allowed).
System Name: To include system name TLV in LLDP frames.
Port Description: To include port description TLV in LLDP frames.
System Description: To include system description TLV in LLDP
frames.
System Capability: To include system capability TLV in LLDP frames.
802.3 MAC-PHY:
802.3 Link Aggregation:
802.3 Maximum Frame Size:
Management Address:
802.1 PVID:
Apply
Click
Apply
to save the values and update the screen.
