73
SE400 SERIES
The ensuing table for
HTTP Information
settings are informational only: HTTP Service and
Session Timeout.
The 802.1x function provides port-based authentication to prevent unauthorized devices (cli-
ents) from gaining access to the network.
802.1x Settings
The 802.1x Settings page allows you to set the state (enabled or disabled) for the selected IP
server address, port, accounting port and associated password, including a re-authentication
period.
To access this page, click
Security
>
802.1x
>
802.1x Settings
.
Figure 87: Security > 802.1x > 802.1x Settings
The following table describes the items in the previous figure.
The ensuing table for
802.1x Information
settings are informational only: 802.1x State,
Server IP, Server Port, Accounting Port, Security Key and Reauth Period.
802.1x
Table 69: Security > 802.1x > 802.1x Settings
Item
Description
State
Click
Enabled
or
Disabled
to set up 802.1x Setting function.
Server IP
Enter the IP address of the local server providing authentication function.
Server Port
Enter the port number (1 to 65535) assigned to the listed Server IP.
Accounting Port
Enter the port number (1 to 65535) assigned to the listed server IP config-
ured to provide authorization and authentication for network access.
Security Key
Enter the variable to define the network security key used in authentication.
Reauth Period
Enter the variable in seconds to define the period of time between authenti-
cation attempts.
Apply
Click
Apply
to save the values and update the screen.
