44
SE400 SERIES
The ensuing table for
LAG Management Information
settings are informational only: LAG,
Name, Type, Link State, Active Member, Standby Member,
Edit
(click to modify the settings)
and
Clear
(click to load default settings).
LAG Port Settings
The LAG Port Settings page allows you to enable or disable, set LAG status, speed and flow
control functions.
In this example we will configure a LAG between the following switches:
To access this page, click
L2 Switching
>
Link Aggregation
>
LAG Port Settings
.
Figure 49: L2 Switching > Link Aggregation > LAG Port Settings
The following table describes the items in the previous figure.
The ensuing table for
LAG Port Status
settings are informational only: LAG, Description, Port
Type, Enable State, Link Status, Speed, Duplex, FlowCtrl Config and FlowCtrl Status.
Type
Click the radio button to specify the type mode: Static or LACP.
Ports
Click the drop-down menu to select designated ports: Port1-10.
Apply
Click
Apply
to save the values and update the screen.
Table 32: L2 Switching > Link Aggregation > LAG Port Settings
Item
Description
LAG Select
Click the drop-down menu to select a predefined LAG trunk definition: LAG
1-8.
Enabled
Click the radio button to enable or disable the LAG Port.
Speed
Click the drop-down menu to select the port speed: Auto, Auto-10M, Auto-
100M, Auto-10/100M, 10M or 100M.
Flow Control
Click the radio button to enable or disable the Flow Control for the LAG Port.
Apply
Click
Apply
to save the values and update the screen.
Table 31: L2 Switching > Link Aggregation > LAG Management
Item
Description
