59
SE400 SERIES
STP Bridge Settings
The STP Bridge Settings page allows you to configure the priority, forward delay, maximum
age, Tx hold count, and the hello time for the bridge.
To access this page, click
L2 Switching
>
Spanning Tree
>
STP Bridge Settings
.
Figure 68: L2 Switching > Spanning Tree > STP Bridge Settings
The following table describes the items in the previous figure.
The ensuing table for
STP Bridge Information
settings are informational only: Priority, For-
ward Delay, Max Age, Tx Hold Count and Hello Time.
The ensuing table for
STP Bridge Status
settings are informational only: Bridge Identifier,
Designated Root Bridge, Root Path Cost, Designated Bridge, Root Port and Last Topology
Change.
Table 51: L2 Switching > Spanning Tree > STP Bridge Settings
Item
Description
Priority
Click the drop-down menu to select the STP bridge priority.
Forward Delay
Enter the variable (4 to 30) to set the forward delay for STP bridge settings.
Max Age
Enter the variable (6 to 40) to set the Max age for STP bridge settings.
Tx Hold Count
Enter the variable (1 to 10) to designate the TX hold count for STP bridge
settings.
Hello Time
Enter the variable (1 to 10) to designate the Hello Time for STP bridge set-
tings.
Apply
Click
Apply
to save the values and update the screen.
