The
AZZA
KT33-BV Mainboard
Page 8
WOL (Wake-On-LAN) Port
One WOL connector supports Wake-On-LAN functionality.
USB Ports
USB allows data exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals. These models
are equipped with four (version 1.1) USB connectors. USB 1 and USB 2 are
external connectors. They can be found on the PC 99 ATX connector. The other
USB connectors are internal connectors and can be used to connect other USB
devices. (Cables for the internal connectors are sold separately).
Connectors
•
Two IDE connectors.
•
One floppy drive interface supports up to two 2.88MB floppy drives.
•
One 20-pin ATX power supply connector.
•
Two fan connectors.
•
One CD audio-IN connector.
•
One Aux-IN connector
•
One WOL (Wake-On-Lan Connector)
•
One Front Audio Connector
ATX Double Deck Ports (PC 99 color-coded connectors)
•
Two USB ports.
•
Two external DB-9 serial port connectors: COM 1(UART) and COM 2
(UART).
•
One SPP/ECP/EPP DB-25 parallel port.
•
One mini-DIN-6 PS/2 mouse port.
•
One mini-DIN-6 PS/2 keyboard port.
•
One game/MIDI port.
•
Three audio jacks: speak-out, line-in and mic-in.
PCI Bus Master IDE Controller
•
Two PCI IDE interfaces support up to four IDE devices.
•
KT33-BV mainboards support ATA/33, ATA/66, ATA/100 and
ATA/133 hard drives.
•
PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to
16.6MB/sec.).
•
Bus mastering reduces CPU utilization during disk transfer.
•
Supports ATAPI CD-ROM, LS-120 and ZIP.
Introduction
