The
AZZA
KT33-BV Mainboard
Page 40
IRQ/Event Activity Detect
When you press the "Enter" the following menu will appear:
!
VGA
When you enable this option, any VGA signal will wake up the system.
!
LPT & COM
When this field is “ON” any activity from these devices, or their IRQ’s will
wake up the system.
!
HDD & FDD
When this field is “ON” any activity from the HDD or the FDD will wake up
the system.
!
PCI Master
When you enable the PCI Master mode, any activity from one of the listed
system peripheral devices wakes up the system.
!
Power On by PCI Card
The system can be woken up by the PME# on the PCI card.
!
Modem/LAN Resume
An input signal from the modem/LAN will wake up the system from a soft
off state.
!
RTC Alarm Resume
When enabled, you can use the following two fields to select the time and
date to wake up the PC system from power saving mode.
Phoenix - Award BIOS CMOS Setup Utility
IRQ/Event Activity Detect
VGA
LPT & COM
HDD & FDD
PCI Master
PowerOn by PCI Card
Modem/LAN Resume
RTC Alarm Resume
X Date (of Month)
X Resume Time (hh:mm:ss)
!
!
!
!
IRQs Activity Monitoring
Item Help
Menu Level
!
!
!
!
[OFF]
[LPT/COM]
[ON]
[OFF]
[Disabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Press Enter]
Off:
When the power returns after an AC power failure the system’s power is
off. You must press the Power button to power-on the system
F o r m e r -
Sts:
When power returns after an AC power failure, the system will return to
the state where you left off before the power failure occurred. If the sys-
tem’s power is off when the AC power failure occurred, it will remain off
when the power returns. If the system’s power is on when the AC power
failure occurred, the system will power-on when the power returns.
Managing The PC BIOS