AZZA KT33-BV Скачать руководство пользователя

Страница: 3 / 48

The

AZZA

KT33-BV Mainboard

Page 2

Copyright

This publication contains information that is protected by copyright. No part of

it may be reproduced in any form or by any means or used to make any trans-

formation adaptation without prior written permission from the copyright hold-

ers. This publication is provided for informational purposes only. The manufac-

turer makes no representations or warranties with respect to the contents or

use of this manual and specifically disclaims any express or implied warranties

of merchantability or fitness for any particular purpose. The user will assume

the entire risk of the use or the results of the use of this document. The manu-

facturer reserves the right to revise this publication and make changes to its

contents at any time, without prior notice.

Trademarks
Microsoft®, MS-DOS®, Windows

, Windows® 95 and Windows® 98 are reg-

istered trademarks of Microsoft Corporation. AMD® Athlon

XP, Athlon

and

Duron

are registered trademarks of AMD Corporation. Award is the registered

trademark of Award Software, Inc. Other trademarks and registered trade-

marks of products appearing in this publication are the properties of their re-

spective holders.

Package Checklist
This package contains the following items:

•

Mainboard

•

Users manual

•

One IDE cable

•

One 34-pin floppy disk drive cable

•

One Driver Utility CD

If any of these items are damaged or missing, please contact your dealer or

sales representative for assistance.

Technical Support
If you require additional information or assistance during installation please

contact your dealer. Your dealer will be able to provide the latest information.

User Notice

Содержание KT33-BV

















































Результаты поиска

Содержание KT33-BV

Отзывы:

Похожие инструкции для KT33-BV

Бренды по названию

Популярные бренды

AZZA KT33-BV, Руководство пользователя

Результаты поиска

Содержание KT33-BV

Отзывы:

Похожие инструкции для KT33-BV

Бренды по названию

Популярные бренды