The
AZZA
KT33-BV Mainboard
Page 37
!
Parallel Port Mode
This field allows you to select an operating mode for the onboard parallel
(printer) port. Select Normal, Compatible, or SPP unless you are certain
your hardware and software both support one of the other available modes.
!
EPP Mode Select
This field allows you to choose the EPP version you want to use. We recom-
mend that you use EPP 1.9 for the best performance but if you do you may
have some connection problems so try setting it to EPP 1.7.
!
ECP Mode Use DMA
This item allows you to select a DMA channel for the parallel port for use
during ECP.
!
Game Port Address
This field allows you to select the I/O address for the onboard game port.
The default is 201.
!
Midi Port Address
This field allows you to select the I/O address for the onboard MIDI port.
The default is 330.
!
MIDI Port IRQ
This field allows you to select the IRQ for the onboard MIDI port. The de-
fault is 10.
Init Display First
This field allows a user, with two graphics cards installed on his system, to se-
lect which graphics card will be activated first: either the PCI graphics card or
the AGP graphics card. If you have only installed one graphics card the BIOS
will automatically detect it and you do not need to set this field.
OnChip USB Controller
This field allows you to enable or disable the onboard USB controller.
USB Keyboard Support
This field should only be enabled if you are using a USB keyboard. If you are
not using
this kind of keyboard you should disable it.
IDE HDD Block Mode
Block mode is also known as block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode select “Enabled”
for automatic detection of the optimal number of block read/writes per sector
the drive can support.
Managing The PC BIOS
