Aztech NETCARD AZ-NC2100, Руководство пользователя

Страница: 45 / 49

45
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 5 — Verifying the Network Card
4.16 For Packet Driver
Location of Driver: \PKTDRV\RTSPKT.COM
Sample Configuration Files:
AUTOEXEC.BAT
RTSPKT 0x60
Notes:
1. Load the packet driver using the software interrupt and any optional
switches if required.
Usage: RTSPKT [options] <software_int_no>
Example: RTSPKT -i 0x7e
The only required parameter is the software interrupt. A packet driver needs
to have a software interrupt assigned to it for other programs to access it.
The recommended interrupt is 0x7e. If you need any of the options listed
below, place them before the software interrupt on the command line.
-i
- Force driver to report itself as 802.3 instead of Ethernet II.
-d - Delayed initialization. Used for diskless booting
-n - NetWare conversion. Converts 802.3 packets into 8137 packets
-w - Windows hack, obsoleted by winpkt
-p - Promiscuous mode disable
-h - Help
-u - Uninstall
-f - Line Speed = Fast ehternet 100Mbps
-e - Line Speed = Ethernet 10Mbps
2. Type command, C:\RTSPKT 0x60 , the screen will appear following message:
System: [345]86 processor, PCI bus, Two 8259s
Packet driver software interrupt is 0x60
Interrupt number is 0x9