Aztech NETCARD AZ-NC2100, Руководство пользователя

Страница: 40 / 49

40
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
4. Select top level of chain to Add or q to quit: 4. sco_tcp
(SCO TCP/IP for UNIX)
5. Select next level of chain to Add or q to quit: Select RTL PCI Family
Fast Ethernet Driver
6. Add chain sco_tcp -> r5e0 (y/n) board 0 type ‘y’
7. Enter the internet Address of this interface n.n.n.n
8. Enter the netmask for this interface (default 255.255.255.0)
9. Does the interface use a broadcast address of all 1’s (y/n) default : y
10. Enter the boardcast address for this interface default: n.n.n.n
11. Are these values correct ? (y/n) y
12. Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q] q
13. Available options:
1) Add a chain
2) Remove a chain
3) Reconfigure a element in a chain
q. Quit Select option: q
14. Do you want to relink to kernel now ? y
15. Do you want this kernel to boot by default (y/n) y
16. Do you want the kernel environment rebuilt (y/n) y
17. Reboot unix
# shutdown -y -g0