29
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Chapter 4 Installing the Network Card Drivers
4.9
For Novell NetWare 4.11
Location of Driver:
\NETWARE\NWSERVER\411\RTSSRV.LAN
Installaton Procedure:
Before you start with the installation process, make sure that the Novell NetWare
v4.11 server is properly installed. Similarly, your network card should also be
properly installed in your server.
1.
Place the
NetCard Installation CD
into your CD-ROM drive and check the
contents of subdirectory
\NETWARE\NWSERVER\411
. It should contain
the following file:
RTSSRV.LAN--- Novell NetWare V4.11 Server Driver
RTSSRV.LDI--- Novell NetWare V4.11 Server Driver Installation Information File
2.
At the NetWare prompt (indicated by the Server name), run the
INSTALL.NLM
program by typing:
server name: LOAD INSTALL <
Enter
>
3.
Select "
Maintenance/Selective Install
" and press <
Enter
>.
4.
Select "
LAN Driver Options (Configure/Load/...)
" and press <
Enter
>.
5.
Press the <
Ins
> key to specify other drivers to install.
6.
Press <
F3
> and specify the driver path (
D:\NETWARE\NWSERVER\411
)
and press <
Enter
>.
(It is assumed that your CD-ROM drive is D. Else, substitute the drive letter accordingly.)
7.
The
RTSSRV.LAN
driver should appear in your choice list for the '
Select a
LAN Driver
' field. Choose this driver to start the driver loading and binding
procedure. This will allow you to load and bind all 4 frame types supported
by NetWare.
8.
Add the
LOAD
and
BIND
statements you required to the server's
AUTOEXEC.NCF
file so that the LAN driver will load automatically each
time the server starts up.
