Aztech NETCARD AZ-NC2100, Руководство пользователя

Страница: 42 / 49

42
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
5. Select the line speed from the menu:
(1)Hwset,(2)Auto,(3)10half.(4)10full.(5)100half.(6)100full.
if you select Hwset, driver will read configuration from EEPROM on the
card. the configuration can be modified by running ‘rset8139’ in the driver
disk. The program is for DOS.
6. Add Protocol to select SCO TCP/IP.
7. Enter the internet Address of this interface, for example : 192.9.9.1
8. Enter the netmask for this interface (default 255.255.255.0)
9. Enter the boardcast address for this interface use default: n.n.n.n
10. Do you want to relink to kernel now ? (y/n)
type in ‘y’
11. Do you want this kernel to boot by default (y/n)
type in ‘y’
12. Do you want the kernel environment rebuilt (y/n)
type in ‘y’
13. Reboot unix
# shutdown -y -g0