Aztech NETCARD AZ-NC2100, Руководство пользователя

Страница: 27 / 49

27
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
4.8 For Novell NetWare 4.1
Location of Driver: \NETWARE\NWSERVER\41\RTSSRV.LAN
Installation Procedure:
Before you start with the installation process, make sure that the Novell NetWare
v4.10 server is properly installed. Similarly, your network card should also be
properly installed in your server.
1. These files can be obtained from NetCard Installation CD
D:\NETWARE\NWSERVER\41
(Assuming that your CD-ROM drive is D. Else, substitute the drive letter accordingly.)
NBI.NLM
MSM.NLM
ETHERTSM.NLM
2. If you can logged in as an ADMIN , copy RTSSRV.LAN relative files from
the NetCard Installation CD \NetWare\NwServer\41 into the NetWare
4.1 subdirectory SYSTEM of your server. (If some files exists, rename the
existing files in the SYSTEM subdirectory).
3. When the NetWare server prompt appears (indicated by a colon), load your
server driver. Simply type:
: LOAD NBI <Entet>
: LOAD RTSSRV <Enter>
or , you can directly load file from NetCard Installation CD:
: LOAD D:\NETWARE\NWSERVER\41\NBI <Enter>
: LOAD D:\NETWARE\NWSERVER\41\RTSSRV <Enter>
4. Bind IPX to the adapter driver. At the NetWare server prompt,type:
:BIND IPX TO RTSSRV <Enter>
5. After pressing < Enter >, the computer will prompt you for the Network
Number. For details on how to assign this number, please refer to your
NetWare Server Installation Manual.
6. Add the load and bind statements you require to the server's
AUTOEXEC.NCF file so that the LAN driver will load automatically each
time the server starts up.