Azkoyen AZKOY GROUP VITRO S5, Руководство пользователя

Страница: 17 / 33

User Manual
- 17 -
CHAPTER 3. FILLING THE MACHINE
3.1.- Initial filling with soluble product
Open the machine door and lift the top cover of the machine
in order to fill the hoppers.
Lift the cover of the hopper to be filled and fill with product. Be
careful that the product filled corresponds to product for that
hopper (each hopper has a label that indicates the product to
be
filled).
Recommendation: The ramp on which the product falls
fromthe hopper should be turned upwards to prevent
unwanted product spillage.
Once the product has been filled, close the hopper cover and
proceed to fill the next hopper.
Figure 4
3.2.- Filling with coffee beans
Remove the hopper cover and dump the content of the coffee package inside until the desired
measure is reached.
If you prefer to take the hopper out of the machine in order to fill it more comfortably,
remember that the hopper flow gate must be closed in order to prevent the content of the
hopper from spilling (Fig. 4).
3.3.- Initial filling with water
All of the machines automatically fill the boiler when the machine is started.
BEFORE CONNECTING THE MACHINE, ENSURE THAT THE MACHINE HAS A WATER
SUPPLY FOR FILLING THE BOILER
(check the connection to the water supply system or
verify that the water tank is filled
).
3.4.- Initial programming
The machine will be sent with the programming predefined by AZKOYEN. In order to modify
any of the values of the functions, enter the
basic menu (see chapter 4) and program the new
functions.
Recommendation: It is a good idea to identify each machine in order to record
accounting, consumption, incidents, etc. Function 470 is available to programme said
code
.
ATTENTION: THE ACTIONS DESCRIBED IN POINTS 3.3 AND 3.4 MUST BE
PERFORMED WITH THE MACHINE “ON” AND THE DOOR OPEN. THEY MAY ONLY BE
PERFORMED BY TECHNICAL PERSONNEL AUTHORISED BY AZKOYEN