Azkoyen AZKOY GROUP VITRO S5, Руководство пользователя

Страница: 20 / 33

User Manual
- 20 -
Operation of the programming control unit in the programming mode.
There are four “editing modes” for communicating with the machine in order to program values
in the functions.
A
lf
a
n
u
m
e
ri
c
al
(
A
B
1
)
PRESSING THE KEY
Key A The digit being edited goes up one character in the table.
Key B The digit being edited goes down one character in the table.
Key C Erase the digit being edited, and it returns to editing the previous digit.
Key D SINGLE PRESS OF THE KEY KEY HELD
The character is validated, and
it goes to editing the next digit.
The character being edited is not
validated, and it exits from the editing
mode.
N
u
m
e
ri
c
a
l (
0
0
1
)
PRESSING THE KEY
Key A Increases the digit being edited (if it is a sign, it changes)
Key B Decreases the digit being edited (if it is a sign, it changes)
Key C
It returns to editing the previous digit (if it is the first number, it
edits the sign, and if it is the sign, it exist and validates).
Key D
It advances to editing the next digit (if it is the first number, it edits the
sign, and if it is the sign, it exist and validates).
O
p
ti
o
n
s
L
is
t
(A
B
C
)
PRESSING THE KEY
Key A
The next option on the list is accessed (if it is the last option, it goes to the
first).
Key B
The previous option on the list is accessed (if it is the first option, it goes
to the last).
Key C It goes up one execution level.
4.3.- Direct access to a function.
By keeping C pressed, the screen displays FUNCTION 000. Choose a function following the
numerical editing method.
4.4.- List of functions
The following list details all of the programming functions of the machine in the order in which
they are displayed on the machine, thereby indicating the message that will be displayed on
the screen, a brief description of the function and a comment about how to operate with the
function, if necessary.