AB-7358-U
8
Wiring and Installation
WARNING
Before wiring or maintenance, be sure to turn off the power to the product.
Failure to do so might cause electric shock or device failure.
Wiring
1) Press the hook on the bottom of the base plate and detach the case.
2) Use 0.22" Dia. to 0.24" Dia. (5.5 mm Dia. to 6.0 mm Dia) cable (AWG 22 (0.3 mm
2
) , 4-core cable recommended) for
connection. Strip 0.20" to 0.24"(5 mm to 6 mm) sheath of each lead wire. (See Fig. 7.)
3) Refer to the wiring label (attached to the base plate) and insert stripped lead wires to each terminal.
Terminals
arrangement
Figure 7. Sheath strip length
Terminal number
Type
Lead wire color*
1
12 V DC (+)
Red (RED)
2
0 V
Black (BLK)
3
AP-bus (+)
White (WHT)
4
AP-bus (-)
Green (GRN)
Note:
Lead wire color shown in the above table is the wire
colors of the recommended cable.
4) Lock each lead wire with lever lock provided on each terminal. Use a tool such as slotted screwdriver to slide the lever lock.
Figure 8. Lead wire connection
5) Insert the cable into the slit and fix the cable on the base plate with a cable tie.
Figure 9. Cable fixed on the base plate
0.20" to 0.24"
(5 mm to 6 mm)
1
2
3
4
1
2
3
4
Insert.
Lead wire
Lever lock
Lock.
Cable
Slit
Cable tie
Fix.
Insert.
