Azbil PTG71, Руководство пользователя

Страница: 51 / 84

6-7
Azbil Corporation
Operation with Field Communication software (CFS100)
Model MTG11A/18A, MTG11B/18B, MTG14C
Selecting a Unit of Pressure
This function allows you to select the measurement units for pressure used by the
pressure transmitter. Although the configured units for pressure can be changed,
the changed settings are not saved by the pressure transmitter. At the next
reconnection, measurements are displayed in the default units for pressure, that
is, kPa or MPa, not in the changed units.
Select DEVICE SETUP
→
BASIC SETUP
→
Pressure Unit.
Units for pressure can be selected from the following.
Note: If the PTG SFN is used in Japan, the selected units should be part of the
standard international system (SI units).
inH2O inHg mmH2O mmHg psi
bar mbar g/Sqcm kg/Sqcm Pa
kPa MPa