manualshive.com logo in svg

Azbil PTG71, Руководство пользователя

Поделиться
Скачать
Azbil PTG71 Скачать руководство пользователя страница 45

Azbil Corporation 

Operation with Field Communication software (CFS100)

Model MTG11A/18A, MTG11B/18B, MTG14C

Chapter 6 :  Operation with Field Communication 

software (CFS100)

6-1 : Overview

Introduction

Field Communication Software Model CFS100 is a tool for communicating 

with Azbil Corporation’s smart field devices (DSTJ and others) that enables 

configuration of device settings. It is a software product that operates on 

Windows PCs. Field Communication Software Model CFS100 communicates 

with Azbil Corporation’s smart field devices using a USB interface connected to 

a Windows PC, which is then connected by communications cable to the USB 

port of a device.

Field Communication Software Model CFS100 supports Azbil Corporation’s 

proprietary SFN/DE communication protocol  as well as the HART 

communication protocol.

For information on the specifications common to all types of devices and 

information on how to install Field Communication Software Model CFS100, 

please refer to the main Field Communication Software Model CFS100 

Operation Manual. 

Before reading this manual, make sure to read the main Field 

Communication Software Model CFS100 Operation Manual thoroughly.

Important Notes

* 

When changing connected devices

 

 Field Communication Software Model CFS100 continues communicating 

with the device when displaying dynamic values, such as pressure, 

so that it can continuously update these values. If you remove the 

communications cable to change the device during this communication, 

an error will occur.

 

 Exit Field Communication Software Model CFS100 before detaching 

the communications cable from the device, and then start Field 

Communication Software Model CFS100 again after connecting the 

communications cable to the new device.

* 

 The use of SFN communication changes the transmission signal, so be 

sure to switch the process control loop to manual mode beforehand.

* 

 For known troubleshooting issues, refer to section 7.4 of CM2-

CFS100-2001, the common edition manual.

6-1

Содержание PTG71





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды