Azbil PTG71 Скачать руководство пользователя страница 3

Страница: 3 / 84

Azbil Corporation

Preface

Model PTG71 / 72 - Smart Pressure Transmitter i

Preface

Thank you very much for purchasing Azbil Corporation's Model PTG Smart Pressure

Transmitter. Azbil Corporation's Model PTG Smart Pressure Transmitters are high

performance, highly reliable general use pressure transmitters. The Model PTG

offer improved performance and reliability with size, weight and cost advantages.

Information regarding the Model PTG can be accessed using handheld SFC (Smart

Field Communicator) at the valve or at a field junction box, or by using operators

console.

This instruction manual describes how to use the Model PTG Smart Pressure

Transmitter. We hope that you will fully use this manual to make the best use of the

features of Model PTG Pressure Transmitter.
For safe operation of this product, please follow the following safety instructions.

Azbil Corporation will not assume any liability for damages arising from failure to

follow these safety instructions.

~Note

Good installation, correct operation, and post-installation maintenance are

essential to safe use of your Model PTG Pressure Transmitter. The safety

instructions are contained in this manual. Fully understand these instructions

before installing, operating, and maintaining your PTG Smart Pressure

Transmitter.

Safety Standard

•

The safety instructions presented in this Instruction Manual conform to ANSI

(American National Standards Institute) Z535-4.

•

In this manual, safety instructions are classified as either Warnings Cautions, and

Notes. The standard of classification is as follows:

WARNING

Failure to observe safety instructions in this category may result in personal injury or, even,

death. Equivalent to definition “warning” in ANSI regulations.

CAUTION

Failure to observe safety instructions in this category could result in damage to or breakdown

of equipment or facilities. Equivalent to definition “caution” in ANSI regulations.

~Note

Information that can be useful to the user. Equivalent to definition to “note” in

ANSI regulations.

Observe safe working practices

Note the following to ensure safety during installation and operation:

Содержание PTG71





















































































Результаты поиска

Содержание PTG71

Отзывы:

Бренды по названию

Популярные бренды

Azbil PTG71, Руководство пользователя

Результаты поиска

Содержание PTG71

Отзывы:

Бренды по названию

Популярные бренды