Azbil Micro Flow CMS 0200, Руководство пользователя

Страница: 25 / 52

17
Chapter 4. Operation
„
Function setup
• To enter the setup mode, press the [MODE] key.
The first two digits on the display will begin blinking.
The first two digits show the function setup item No., and the last
two digits show the setting.
• Pressing the [ ▼ ] key displays the next item No., and pressing the
[
▲
] key displays the previous item No.
• While
12
*2 is displayed, pressing the [
▼
] key again returns the
display to
0 1
.
While
0 1
. is displayed, pressing the [
▲
] key again returns the
display to
12
.
*2
• When the first two digits display the desired setup item, press the
[ENT] key while the digits are blinking.
The setup item is selected, and the last two digits will begin blinking.
• Press the [
▲
] or [
▼
] key to select the desired setting to the last two
digits and then press the [ENT] key. All four digits will be lit.
• Check that the selected item and setting are correct.
• To continue setup, press the
[MODE] key again and repeat these steps.
The function setup menu is shown on the next page.
*1. On communication models,
30
,
3 1
, and
32
are displayed, fol-
lowing
12
.
*2. On communication models,
32
is the last item.
[
▲
] key [
▼
] key
[
▲
] key [
▼
] key
[
▼
] key
Keylock
Measurement mode
Event 1 type
Low flow cutoff
*1