Terms and Conditions
We would like to express our appreciation for your purchase and use of Azbil Corporation's products.
You are required to acknowledge and agree upon the following terms and conditions for your purchase of Azbil Corporation's
products (field instruments, control valves, and control products), unless otherwise stated in any separate document,
including, without limitation, estimation sheets, written agreements, catalogs, specifications and instruction manuals.
1. Warranty period and warranty scope
1.1 Warranty period
Azbil Corporation's products shall be warranted for one (1) year from the date of your purchase of the said
products or the delivery of the said products to a place designated by you.
1.2 Warranty scope
In the event that Azbil Corporation's products has any failure attributable to azbil during the aforementioned warranty
period, azbil shall, without charge, deliver a replacement for the said product to the place where you purchased, or
repair the said product and deliver it to the aforementioned place.
Notwithstanding the foregoing, any failure falling under one of the following shall not be covered under this warranty:
(1) Failure caused by your improper use of Azbil Corporation's products
(noncompliance with conditions, environment of use, precautions, etc. set forth in catalogs, specifications,
instruction manuals, etc.);
(2) Failure caused for other reasons than Azbil Corporation's products;
(3) Failure caused by any modification or repair made by any person other than azbil or azbil's
subcontractors;
(4) Failure caused by your use of Azbil Corporation's products in a manner not conforming to the intended
usage of that product;
(5) Failure that the state-of-the-art at the time of Azbil Corporation's shipment did not allow us to predict; or
(6) Failure that arose from any reason not attributable to Azbil Corporation, including, without limitation, acts
of God, disasters, and actions taken by a third party.
Please note that the term "warranty" as used herein refers to equipment-only-warranty, and Azbil Corporation
shall not be liable for any damages, including direct, indirect, special, incidental or consequential damages in
connection with or arising out of Azbil Corporation's products.
2. Ascertainment of suitability
You are required to ascertain the suitability of Azbil Corporation's products in case of your use of the same with
your machinery, equipment, etc. (hereinafter referred to as "Equipment") on your own responsibility, taking the
following matters into consideration:
(1) Regulations and standards or laws that your Equipment is to comply with.
(2) Examples of application described in any documents provided by Azbil Corporation are for your reference
purpose only, and you are required to check the functions and safety of your Equipment prior to your use.
(3) Measures to be taken to secure the required level of the reliability and safety of your Equipment in your use
Although Azbil Corporation is constantly making efforts to improve the quality and reliability of Azbil
Corporation's products, there exists a possibility that parts and machinery may break down.
You are required to provide your Equipment with fool-proof design, fail-safe design, anti-flame
propagation design, safety design, or the like so that the said Equipment may satisfy the level of the
reliability and safety required in your use, whereby preventing any occurrence of physical injuries, fires,
significant damage, and so forth.
3. Precautions and restrictions on application
Azbil Corporation's products other than those explicitly specified as applicable (e.g. azbil Limit Switch For Nuclear
Energy) shall not be used in a nuclear energy controlled area (radiation controlled area).
Any Azbil Corporation's products shall not be used for/with medical equipment.
In addition,
you are required to conduct a consultation with our sales representative and understand detail specifications,
cautions for operation, and so forth by reference to catalogs, specifications, instruction manual , etc. in case that
you intend to use Azbil Corporation's products for any purposes specified in (1) through (6) below.
Moreover, you are required to provide your Equipment with fool-proof design, fail-safe design, anti-flame
propagation design and other designs of protection/safety circuit on your own responsibility to ensure the
reliability and safety, whereby preventing problems caused by failure or nonconformity.
(1) For use under such conditions or in such environments as not stated in technical documents, including
catalogs, specification, and instruction manuals
(2) For use of specific purposes, such as:
* Nuclear energy/radiation related facilities
[For use outside nuclear energy controlled areas] [For use of Azbil Corporation's Limit Switch For
Nuclear Energy]
* Machinery or equipment for space/sea bottom
* Transportation equipment
[Railway, aircraft, vessels, vehicle equipment, etc.]
* Antidisaster/crime-prevention equipment
* Burning appliances
* Electrothermal equipment
* Amusement facilities
(3) Supply systems such as electricity/gas/water supply systems, large-scale communication systems, and
traffic/air traffic control systems requiring high reliability
(4) Facilities that are to comply with regulations of governmental/public agencies or specific industries
(5) Machinery or equipment that may affect human lives, human bodies or properties
(6) Other machinery or equipment equivalent to those set forth in items (1) to (5) above which require high
reliability and safety
