22
Chapter 5. SETTING AND OPERATION
■
Function setup
●
Setup method
(1) Push and hold the
[mode]
key for 2 seconds or more in the normal indication
mode.
>> The function number is displayed in the first 3 digits and the current setting
is displayed in the last 2 digits.
(2) Change the function setup to the desired item by pushing
[
]
or
[
]
, and then
press
[enter]
.
>> The function setup number goes out, and the only the setting (in the last 2
digits) is shown.
(3) Change the setting with the
[
]
or
[
]
key, and then press
[enter]
.
>> The changed setting is now entered, and both the function number and the
setting are shown.
If the
[mode]
key is pressed instead of the
[enter]
key, the
MCF
exits setup
mode without changing the setting.
(4) Repeat steps (2) to (3) if you want to continue setup.
To exit setup mode, press and hold the
[mode]
key for 2 seconds or more to move
to parameter setup, and then again press and hold the
[mode]
key for 2 seconds or
more to return to normal indication mode.
Handling Precautions
• If there is no key operation for 30 seconds or more, processing stops and
the display turns off. Since the mode will revert to the normal indication
mode when the display turns on again, as necessary, return to step (1) to
begin the interrupted setup again.
Indication
example
[enter] key
Function
number
Function
selection
Current
setting
[enter] key
or
[mode] key
During
setup
After
setup
[mode] key
2s or more
Parameter
setup
or key
