1-3
Chapter 1. INTRODUCTION
Hardware Configuration
The hardware configuration for loader communication is explained below.
z
Connection method
•
Turn off the supply of power to the device.
•
Remove the cable from the waterproof connector on the device, and connect
the cable to the adapter for loader communication cable with cable B, which is
supplied with the adapter.
•
Connect cable A, which is also supplied with the adapter, to the waterproof
connector on the device and to the adapter for loader communication cable.
•
The device can now be turned on or off with the power switch on the adapter for
loader communication cable.
USB port
Note 1. During loader communication, output from the F9Y7H_1 cable cannot be checked with the loader.
Note 2. The underscore represents a digit that tells the material of the cable.
USB loader cable
(81441177-001)
Windows PC
(with the loader installed)
Adapter for loader communication cable
(F9Y7A1)
The device (F7M)
For normal operation
For loader communication
Remove the cable from
the waterproof connector
Cable (F9Y7H_1)
Cable (F9Y7H_1)
←
24 V DC
→
Output
←
24 V DC
Cable A
(included with the adapter)
Cable B
(included with the adapter)
