ii
Safety Precautions
CAUTION
To use loader communications, remove the cable from the F7M waterproof connector and
connect it to the adapter for loader communication cable. When handling the cable, make
sure that the electrodes of the connector are free from water drops and dust. Otherwise, a
failure or abnormal output might result. Also, be sure to turn off the F7M before removing
or connecting the connector. Otherwise, the F7M or the adapter for loader communication
cable may fail, and the power supply for the equipment may fail or catch fire.
The adapter for loader communication cable is not water resistant. Water drops or dust
entering inside or accumulating around the electrodes may damage the F7M or the adapter ,
or may cause external devices to catch fire or fail.
Do not apply excessive force to the plug of the USB loader cable when it is connected to the
adapter for loader communication cable. Doing so might damage the plug or the adapter.
After using loader communications, remove the cable for the F7M waterproof connector from
the adapter for loader communication cable, and insert it all the way into the waterproof
connector. If the cable is not inserted properly, the device's water resistance will be impaired,
the F7M or connected equipment may fail, and the connected equipment may catch fire.
