Azbil F7M, Руководство пользователя

Страница: 53 / 58

4-5
Chapter 4. TROUBLESHOOTING
Menu Message Description Corrective action
[Parameters]
→ [Read all
parameters from
device]
The model is not supported by
the loader.
Reading of parameters failed. A product other than the
device is connected or the
device model not supported
by the loader is specified, so
parameters cannot be read
from the device. Check the connected product.
Download the latest version of
the loader software from the
Azbil website (Compo Club),
install the loader, and try again.
Reading of parameters failed. Reading of parameters from
the device was aborted
because a communication
error, etc., occurred. Please check the
communication settings for the
loader, the power to the device,
and the cable connections, and
then try again.
[Parameters]
→
[Write
parameters to the
device]
Parameters could not be written
to the device because the model
number of the device is different
from the number specified by the
loader.
The model number in the loader’s
device information must be the
same as the model number of the
connected device.
Model number specified by the
loader: F7M _ _ _ _ _ _ _ _
Model number of the connected
device: F7M _ _ _ _ _ _ _ _ Parameters could not be
written to the device because
the model number of the
connected device is different
from the model number
currently specified for work
using the loader. The model number in the
loader’s device information
must be the same as the model
number of the connected
device.
Parameters could not be written
to the device because some of the
values were invalid.
Please specify valid values for
the following items and then try
again. Parameters could not be
written to the device because
the specified parameters
include out-of-range values,
or because the combination
of the specified parameters is
prohibited. Please correct the value of the
parameter(s) displayed under
the message
and try again.
Writing of parameters failed. Writing parameters to the
device was aborted because
a communication error, etc.,
occurred. Please check the
communication settings for the
loader, the power to the device,
and the cable connections, and
then try again.